Aquarium Products

Sander Monitors & Control Equipment

pH Meter Controller

This is used to measure and adjust pH levels in the water

Technical Data

Voltage: 230V

Frequency: 50/60Hz

Digital liquid crystal display: 3.5 digits

Range: 0 - 14 pH

Accuracy: 1 digit = +/- 0.01 pH

Adjustable setpoint range: 1.5 - 13.5 pH

Switching hysteresis: Setpoint +/- 0 05 pH

Maximum switching capacity: 8A

Dimensions: 115mm long x 65mm wide x 120mm high

Measuring probe: pH probe. Industrial cable connection with electrode head plug and BNC coaxial cable.

Spare probes and calibration fluid are available for this unit.

Redox Meter Controller

This is used to measure and control redox potential and comes as a complete unit ready for connection to the electricity supply

Ideally, a redox potential of 350-400mV should be maintained.

Technical Data

Voltage: 230V

Frequency: 50/60Hz

Digital liquid crystal display: 3.5 digits

Range: 1999mV +1999mV

Accuracy: 1 digit = +/- 0.01 mV

Adjustable setpoint range: 0 - 1050mV

Switching hysteresis: Setpoint +/- 3mV

Maximum switching capacity: 8A

Dimensions: 120mm long x 65mm wide x 75mm high

Measuring probe: Redox electrode with gel filling and platinum sensor. BNC cable connection.

Replacement probes and cleaning fluid are available for this unit.

Water Level Controller

• Controls water level.

• Shuts off the flow of water in the event of an overflow.

• Gives warning if water level is too low.

• Comes as a complete unit with plug, measuring unit, regulation device, plug socket, measuring cable and electrode.