Commercial Products

FSI X100 Cartridge/Bag Filter Housing

The FSI X100 is an excellent, low cost filter housing and its design means that it is highly adaptable, offering the choice of using either a bag filter or a cartridge filter in the same unit.

It offers filtration to as little as 1 micron and includes the housing, corrosion-proof legs, an adapter plate and a comprehensive manual, with optional pressure gauges also available.

The unit is manufactured entirely from polypropylene with a UV inhibitor for all weather durability, and has a 2" NPT inlet and outlet.

XO1 Filter Bag

Measuring 6" in diameter by 20" long the XO1 Filter Bag has a surface area of 0.186 m².

The XO1 is fitted with the patented Polyloc Ring which seals directly against the wall of the filter housing and eliminates the chance of fluid by-pass.

A heavy duty Polypropylene Strainer Basket supports the XO1.

X20 Filter Cartridge

The X20 Polyseal Cartridge is a steep pore gradient depth filter designed to have a large dirt loading capacity.

The X20 measures 5.5" in diameter and 23.25" long, yielding a total cartridge volume of 500 in^3.

In laboratory tests, the X20 has out-performed standard 10" cartridges by holding 20 times the volume of dirt.

The design of the X20 Polyseal Cartridge features a single open end that directs fluid from outside the cartridge in through the filter. A built-in handle on the cartridge top assists in seating and removing the X20.

The cartridge bottom is equipped with FSI's patented Polyseal End Fitting to ensure a by-pass free sealing without the need for double O rings or flat gaskets. Fitting securely into the cartridge plate, the X20 does not require springs, hold-down plates or centre posts.

Maximum recommended flow rate is 10-12 m3/hr (160-200 l/min) for both cartridge and bag filters. Maximum pressure is 6.9 bar (100 psi).

Technical Details